12.10.020 Standards.
All site entrance and exit driveways shall be located to afford maximum safety to traffic, provide for safe and convenient ingress and egress to and from the site, and minimize conflict with the flow of traffic. All driveways must meet the public works department and state Department of Transportation and Public Facilities standards as well as the following:
A. Corner Clearance. The minimum distance between the nearest edge of driveway and the nearest intersecting public roadway curb face, or, for uncurbed roadways, the nearest edge of traveled way shall be 40 feet.
B. Arrangement. Lots with frontages of 50 feet or less shall be limited to one driveway per frontage. Lots with frontages in excess of 50 feet shall be limited to two driveways, except where a single ownership frontage exceeds 300 feet.
C. Driveway Angle. Driveways used for two-way operation shall intersect the road at an angle as near to 90 degrees as site conditions will permit and in no case less than 60 degrees.